Section V. MAINTENANCE PROCEDURES - TM-55-1730-223-130030

TM 55-1730-223-13

Section V. MAINTENANCE PROCEDURES

3-11. IDENTIFYING ASSEMBLIES FOR MAINTENANCE. The assemblies of the

maintenance platform are identified in figure 3-2 and listed in the

maintenance summary in table 3-6. Table 3-6 provides references to

paragraphs containing the required maintenance instructions.

Table 3-6. Maintenance Summary

REF MAINT

ASSEMBLY

PARAGRAPHS

Lunette Assembly - Includes Tongue, Steering

Bar, Tie Rods, Detent Pin & Tie Rod Pins.

Handrails, Work Platform and Steps

Brakes, Wheels, Immobilizing Jacks and

Locking Pins

Electrical, Pneumatic Appliances

Static Discharge Reel and Hardware

Handwheel and Jackscrew

3-12. LUNETTE ASSEMBLY MAINTENANCE. The Lunette assembly consists of

a tongue, steering bar, tie rods, detent pin and tie rod pins. The

removal, repair, and installation instructions are as follows:

a. Refer to paragraph 3-13 for removal, repair, and installation of

the tongue.

b. Refer to paragraph 3-16 for removal, repair, and installation of

the steering bar.

c. Refer to paragraph 3-14 for removal, repair, and installation of

the tie rods and tie rod pins.

d. Refer to paragraph 3-15 for removal, repair, and installation of

the detent pin.