 |
|||
|
|
|||
|
Page Title:
REMOVAL, REPAIR, AND INSTALLATION OF TONGUE |
|
||
| ||||||||||
|
|
 TM 55-1730-223-13
INSTALLATION OF TONGUE
a. Support tongue (4), remove
nut (1), washer (3), and bolt
(2). (AVUM)
b. Remove tongue (4). (AVUM)
c. Repair tongue by welding and
painting as required. Replace any
defective hardware. (AVIM)
d. To install, align tongue (4)
with steering bar (5), insert
bolt (2), and install washer (3)
and nut (1). (AVUM)
INSTALLATION OF TIE RODS
a. Remove tie rod pins (3 and 4)
(AVUM)
b. Remove screws (1 and 6). (AVUM)
c. Pull tie rods (2 and 5).(AVUM)
d. Repair tie rods and replace
defective hardware as required.
Repair at AVIM.
e. Install tie rods (2 and 5)
and secure with screws (1 and 6)
and tie rod pins (3 and 4). (AVUM)
INSTALLATION OF DETENT PIN
a. Remove detent pin (1) from
steering bar (2). (AVUM)
b. Repair detent pin by
refinishing or replace if
beyond repair. Repair at AVIM.
c. Install detent pin (1) by
inserting through bottom platform
step (3) and steering bar (2). (AVUM)
3-8
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals