REMOVAL, REPAIR, AND INSTALLATION OF STEERING BAR.

TM 55-1730-223-13

3-16. REMOVAL, REPAIR, AND

INSTALLATION OF STEERING BAR.

NOTE

Steering bar can be re-

placed at AVUM but must

be repaired at AVIM.

a. Remove tongue. (See para 3-13)

b. Remove tie rods. (See para 3-14)

c. Remove detent pin.(See para 3-15)

d. Pull steering bar (1) from

beneath platform step (2) and the

main frame (3).

e. Repair the steering bar by

welding.

Replace steering bar if

beyond repair.

f. To install, insert steering

bar (1) beneath bottom platform

step (2) and align with hole in

main frame (3).

g. Install detent pin. (See para 3-15)

h. Install tie rods. (See para 3-14)

i. Install tongue. (See para 3-13)

3-17. MAINTENANCE OF HANDRAILS, PLATFORM, AND STEPS. The removal,

repair, and installation instructions are as follows:

a. Refer to paragraph 3-18 for removal, repair, and installation of

the handrails for the work platform.

b. Refer to paragraph 3-19 for removal, repair, and installation of

the handrails for the steps.

c. Refer to paragraph 3-20 for removal, repair, and installation of

the work platform.

d. Refer to paragraph 3-21 for removal, repair, and installation of

rear legs.

e. Refer to paragraph 3-22 for removal, repair, and installation of

steps.

f. Refer to paragraph 3-23 for removal, repair, and installation of

front legs.

3-9