Assembly. (cont) - TM-9-2320-366-20-30921

TM 9-2320-366-20-3

NOTE

Perform steps (11) through (14) on junction

boxes that have not had modification kit

installed.

(11) Install shutdown relay (30) on bracket (31) with three

washers (32), lockwashers (33), and nuts (34).

(12) Install bracket (31) on junction box (2) with three rivets

(35).

(13) Install shrink tubing (36) over ends of five wires (37) and

solder ends on shutdown relay (30) positions 1 through

(14) Shrink the tubing over ends of all relay pins.

(15) Install diode assembly (38) on junction box (2) with two

rivets (39).

(16) Connect three quick disconnect terminals (40) on diode

assembly (38).

(17) Apply varnish to quick disconnect terminals (40).

Change 1

7-172.1/(7-172.2 Blank)