WATER PUMP AND FITTINGS REPLACEMENT

TM 9-2320-366-20-3

6-12. WATER PUMP AND FITTINGS REPLACEMENT

This task covers:

a. Water Pump Removal

c. Fittings Removal

b. Water Pump Installation

d. Fittings Installation

e. Follow-On Maintenance

INITIAL SETUP

Equipment Conditions

Materials/Parts

100 amp alternator removed, if equipped (para 7-2).

Antifreeze, Ethylene Glycol, Permanent (Item 12,

200 amp alternator removed, if equipped (para 20-45).

Alternator brackets removed (para 7-4).

Packing, Preformed (Item 195, Appendix G)

Packing, Preformed (Item 214, Appendix G)

Tools and Special Tools

Packing, Preformed (3) (Item 205, Appendix G)

Goggles, Industrial (Item 15, Appendix C)

Packing, Preformed (2) (Item 202, Appendix G)

Container (52 qt (50 L) capacity)

Tool Kit, Genl Mech (Item 46, Appendix C)

Wrench, Torque, 0-75 lb-in. (Item 90, Appendix B)

Wrench, Adjustable, Automotive (Item 53, Appendix C)

Gage, Belt Tension (Item 19, Appendix B)

Wrench, Torque, 0-175 lb-ft (Item 58, Appendix C)

WARNING

Wear appropriate eye protection when

working under vehicle due to the

possibility of falling debris. Failure to

comply may result in injury to personnel

a. Water Pump Removal.

(1) Position container under radiator (1).

(2) Remove radiator cap (2) from radiator overflow tank

(3).

(3) Open radiator draincock (4) and drain coolant.

(4) Close radiator draincock (4).

Change 2

6-63