|
|
TM
9-2320-279-20-1
Electrical System Maintenance Instructions (Cont)
7-73.2. BEACON LIGHT SUPPORT BRACKETS REMOVAL/INSTALLATION (M984E1).
This task covers:
d. Right Side Installation
a. Left Side Removal
e. Follow-on Maintenance
b. Left Side Installation
c. Right Side Removal
INITIAL SETUP
Equipment Condition
Models
M984E1
TM or Para
Condition Description
Test Equipment
Movable worklamp and
bracket removed.
None
Beacon light assembly
Special Tools
removed.
None
Retriever control assembly
Para 17-22
removed (left side only).
Supplies
Control box removed (right
None
side only).
Personnel Required
Special Environmental Conditions
MOS 63S, Heavy wheel vehicle mechanic
None
References
General Safety Instructions
None
None
a. Left Side Removal.
NOTE
Clips and plastic cable ties are removed as
necessary.
screws (3), and bracket (4) from towing
support assembly (5).
(2) Remove five screws (6) and data
plate (7) from bracket (4).
b. Left Side Installation.
(1) Install data plate (7) on bracket (4) with
five screws (6).
(2) Install bracket (4) on towing support
assembly (5) with two screws (3),
lockwashers (2), and nuts (1).
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |