TOW LIGHT ASSEMBLY REPAIR (M984E1).

TM 9-2320-279-20-1

Electrical System Maintenance Instructions (Cont)

7-73.2.

BEACON LIGHT SUPPORT BRACKETS REMOVAL/INSTALLATION (M984E1).

Remove two

c. Right Side Removal.

nuts (1), lockwashers (2), screws (3), and

bracket (4) from towing support assembly (5).

d. Right Side Installation. Install

bracket (4) on towing support assembly (5) with

two screws (3), lockwashers (2), and nuts (1).

Follow-on Maintenance.

(1)

Install strobe light assembly (para 7-73.1).

(2)

Install moveable worklamp assembly and

bracket (para 7-54.1).

(3)

Install control box (para 7-52.1) right side only.

(4)

Install retriever control assembly (para 17-22) left side only.

END OF TASK

7-73.3.

TOW LIGHT ASSEMBLY REPAIR (M984E1).

This task covers:

a. Removal

c. Follow-on Maintenance

b. Installation

INITIAL SETUP

Models

References

M984E1

None

Test Equipment

Equipment Condition

TM or Para

Condition Description

None

TM 9-2320-279-10 Tow light assembly removed

from stowage box and

Special Tools

mounting brackets installed.

None

Supplies

Special Environmental Conditions

Tags, identification, Item 48, Appendix C

None

Ties, cable, plastic, Item 52, Appendix C

Personnel Required

General Safety Instructions

MOS 63S, Heavy wheel vehicle mechanic

None

NOTE

There are two models of composite lights.

Model A is a lamp type light.

Model B is an LED type light with a ground wire pigtail attached.

7-272

Change 5