REMOVAL, REPAIR, AND INSTALLATION OF WORK PLATFORM.

TM 55-1730-223-13

NOTE

The platform can be replaced at AVUM

but must be repaired at AVIM.

The platform must be lowered to perform all maintenance.

Remove handrails from platform.

c. Remove two nuts (1), two

washers (2), and two shoulder

screws (3) from both rear legs

(4).

d. Remove two self-locking

nuts (5), two washers (6) and two

shoulder screws (7) from both

front legs (8).

e. Lift platform (1) from

front legs (2) and rear legs

(3).

f. Repair platform by welding

and painting. Replace defective

hardware as required.

g. To install, lift platform

(1)and align holes with front

legs (2) and rear legs (3).

h. Insert shoulder screws (4)

through both front legs (2) and

platform (1), and install washers

and self-locking nuts. Do not

tighten nuts at this time.

Install shoulder screw (5),

washer, and nut at each rear leg

(3) and connect to platform (1).

j. Tighten the nuts installed

in steps h and i.

3-12