HYDRAULIC SYSTEM (CYLINDER ASSEMBLY) (TASK 5)

TM55-1730-215-13 & P

h. Installation.

(1) Position pump assembly on the platform floor and install four

retaining bolts.

(2) Connect hydraulic hose to pump assembly.

(3) Fill hydraulic pump assembly to within 1/2 inch of the top of

reservoir with hydraulic fluid (item 3, Appendix D).

NOTE

Readjustment of the valve release lever

after pump is installed on the platform

will be necessary after removal or repair

of release valve. Refer to table 3-3, item

6, adjust lever to obtain proper rate of

descent.

3-17. HYDRAULIC SYSTEM (CYLINDER ASSEMBLY) (TASK 5). Reference table 3-11.

Table 3-11. Hydraulic System (Cylinder Assembly) (Group 0402) Task 5

TASK No. 5

Paragraph

ITEM

3-17b.

Removal

Cylinder

Assembly

3-17C.

Inspection

Cylinder

Assembly

3-17d.

Disassembly (AVIM)

Cylinder

Assembly

3-17e.

Cylinder

Assembly

Cleaning (AVIM)

3-17f.

Cylinder

Assembly

Inspection and

Repair (AVIM)

3-17g.

Reassembly (AVIM)

Cylinder

Assembly

3-17h.

Cylinder

Assembly

Installation

3-25