Disassembly. (AVIM)

TM55-1730-215-13 & P

d. Disassembly. (AVIM)

(1) Remove stop nut (1, figure 3-5) and plunger wiper (2).

(2) Remove plunger (3) and spacer (4) from cylinder (11).

(3) Dissamble plunger assembly by removing stop nut (5),

spreader (6), grommet (7), plunger cap (8), disk (9), and O-Ring

(10)

e. Cleaning. (AVIM)

Perform solvent cleaning operations in

an approved cleaning cabinet or in a

well-ventilated area. Keep dry clean-

ing solvent away from sparks and

flames. Avoid prolonged breathing of

vapors. Avoid eye and repeated skin

contact. Use approved personnel pro-

tective equipment (eye goggles/face

shield/gloves) when handling solvents

or using compressed air. Provide pro-

tection from flying particles when

using compressed air. Do not direct

airstream towards self or other

personnel.

Clean disassembled parts with dry cleaning solvent (item 4,

Appendix D), and dry with clean, lint-free cloth.

f. Inspection and Repair (AVIM).

(1) Inspect O-ring (10,

figure 3-5) plunger disk (9),

plunger cup (8), grommet (7) and

spreader (6) for evidence of

tearing, swelling, nicks or other

defects which may cause leaking.

Replace all defective parts.

(2) Inspect cylinder (11)

for pitting, scoring,

roughness.

(3) Lightly hone cylinder to

recondition if possible. If

pitting or scoring is too deep

to hone out, replace cylinder.

3-27