 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-5420-279-23
8
5
2
1
7
6
1
Hydraulic Hoses
Top Mounting
(7)
Each mounting consists of a cylinder pin (5), locking plate (7) secured with two screws (6).
(8)
Two spacers (9) are also fitted between the cylinder and the mounting point.
(9)
The process of removing the cylinder pins is the same for all mounting points.
(10)
Support the weight of the stow cylinder (3) and remove the locking plate screws (6).
(11)
Remove the locking plate (7).
(12)
Remove the cylinder pin (5) in the direction of the locking plate mounting holes and retain
the spacers.
(13)
Remove the first section of the fixed walkway. Refer to procedure 5-090.
(14)
Support the weight of the launch frame with a lifting device and sling.
(15)
Support the weight of the cross member (4) and remove the bottom cylinder pin locking
plate screws (6).
(16)
Remove the locking plate (7).
(17)
Remove the cylinder pin (5) in the direction of the locking plate mounting holes and retain
the spacers.
(18)
Note the position of and remove the hydraulic hoses (8) connected to the articulator
cylinder.
(19)
Support the weight of the articulator cylinder (1) with a second lifting device and sling.
(20)
Remove the top cylinder pin locking plate screws (6).
(21)
Remove the locking plate (7).
(22)
Remove the cylinder pin (5) in the direction of the locking plate mounting holes and retain
the spacers.
(23)
Remove the articulator cylinder (1).
(24)
Check all cylinder pins, screws, locking plates and spacers for damage or wear.
(25)
Check the cross member and top mounting points for damage or wear.
(26)
Replace components as necessary.
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals