Inspection Procedures. - TB-1-1520-237-20-2070003

TB 1-1520-237-20-207

NOMENCLATURE

PART NUMBER

Hydraulic Hoist

BL27100-191

Hydraulic Hoist

BL27100-192

Electric Hoist

BL29900-30

7. Parts to be Inspected.

NOMENCLATURE

PART NUMBER

NATIONAL STOCK NUMBER

Shaft Assembly, Tension Roller

BL-10455

3040-01-222-5110

Airframe Hoist Base Fitting

70209-62001-101

Hoist Support ARM

70850-22113-041

1680-01-161-8322

8. Inspection Procedures.

a. If the provisions for mounting an External Hoist are on the aircraft; inspect and correct IAW paragraph 9 and

report the results of the inspection IAW 14b.

b. If the unit has a paragraph 6 Hydraulic Hoist, inspect and correct IAW paragraph 9. Report the results of the

inspection lAW paragraph 14b.

c. If that aircraft does not have provisions for mounting an External Hoist the inspection is complete and no report is

required.

d. If the unit does not have a paragraph 6 External Hoist the inspection is complete.

9. Correction Procedures Contact the Technical POC in paragraph 16a VIA Telephone, E-mail, or FAX to obtain the

specific instructions for inspection/correction of the mounting provisions and/or Hydraulic Hoist in the request, provide the

tail number(s) of aircraft that have the provisions for mounting the External Hoist, and provide the part number and serial

number of each hoist on hand.

10. Supply/Parts and Disposition.

a. Parts Required. Items cited in paragraph 7 may be required to replace defective items.

b. Requisitioning Instructions. Requisition replacement parts using normal supply procedures. For aircraft other

than the MH-60K, the Hoist is non-standard equipment that is authorized by the AWR process and is maintained and

supported through local resources. AMCOM does not logistically support these items.

c. Bulk and Consumable Materials. NA.

d. Disposition. Dispose of removed parts/components using normal supply procedures.

Any of t e older style

Tension Rollers must be demilitarized IAW TM 1-1500-328-23.

e. Disposition of Hazardous Material.

In accordance with environmental protective agency directives as

implemented by your servicing environmental coordinator (AR 200-1).

11. Special Tools, Jigs and Fixtures Required. N/A.

12. Application.

a. Category of Maintenance. AVUM. Aircraft downtown will be charged to AVUM maintenance.

b. Estimated time required.

(1) Total of 0.25 man-hours using one person.

(2) Total of 0 hours downtime for one end item.

c. Estimated cost impact of stock fund items to the field.