Correction Procedure

TB 1-1520-237-20-195

(2) Retail Stock. Upon receipt of this TB commanders and others maintaining retail stock at

installation level and below shall contact the supported aviation unit to perform the inspection required by

paragraph 8. All paragraph 7 items from American General (CAGE 1W160) found in retail stock are to be

demilitarized and disposed IAW paragraph 10. Report compliance with this TB IAW paragraph 14d(2).

Components/Parts in work (Depot level and Others). N/A.

Task/Inspection Suspense Date. During next 20 flight hours/30 days.

Reporting Compliance Suspense Date. No later than 22 August 1997 per paragraph 14.a of this TB.

Summary of the Problem.

a The bellcrank support, P/N 70400-08158-101 manufactured by American General, cage code

1W160, have not been tested, due to non-availability of testable parts, and must be removed from service.

Engineering estimates that 100 hours of additional service is acceptable without incurring a significant risk

due to this component.

For manpower/downtime and funding impacts, see paragraph 12.

c. The purpose of this TB is to remove all bellcrank support, P/N 70400-08158-101, manufactured

by American General (CAGE 1W160) under contract DAAJ09-84-C-A333.

End items to be Inspected. All H-60 Aircraft.

Assembly Components to be Inspected. N/A

Parts to be Inspected.

NOMENCLATURE

PART NUMBER

NATlONAL STOCK NUMBER

Bellcrank Support

70400-08158-101

8. lnspection Procedures. Verify visually that bellcrank support, P/N 70400-08158-101 manufactured

by American General (CAGE 1W160) is installed on the aircraft. The cage number can be found on a label

which is visible on the side of the component. If the specified bellcrank support is not identified, the inspection

is completed (Report per paragraph 14b). If specified ballcrank support is identified, remove IAW paragraph

9. Correction Procedure Replace all bellcrank support P/N 70400-08158-101, manufactured by

American General (CAGE 1W160) using normal maintenance practices IAW TM 1-1520-237-23, paragraph

11.30.11, and TM 1-1520-250-23, paragraph 11.26.11 at the next scheduled maintenance but no later than

the next 100-hours or one year from the date of this TB whichever comes frost. Dispose of IAW paragraph

10d.

10. Supply/Parts and Disposition.

a. Parts Required. Bellcrank Support, P/N 70400-08158-101, NSN 1615-01-092-6792, 1EA, may

be required to replace part cited in paragraph 7.

b. Requisitioning Instructions. Contact logistical point of contact in paragraph 16b for requisitioning

instructions. Requisition replacement parts using project code XDN.

Bulk and Consumable Materials. N/A

d. Disposition. Demilitarize/mutilate any paragraph 7 part/component manufactured by American

General (Cage 1W160) and dispose of using normal supply procedures.

e. Disposition of Hazardous Material. In accordance with environmental protection agency directives

as implemented by your servicing environmental coordinator (AR 200-1)

11. Special Tools, Jigs and Fixtures Required. N/A.

12. Application.