Table 2-8. End Bell Housing (Models 5504AA and 5504AB) Wear Limits

TM 9-2920-225-34

NOTE

If end bell is damaged or is not within limits given in

tables 2-8 and 2-9, generator is nonrepairable.

Check that drive end bell (1) is not cracked, bent or warped.

Measure inside diameter of drive end bell (1) bearing bore ( 2).

NOTE

When working on models 5504AA and 5504AB, if any part

of drive assembly is damaged, generator is nonrepairable.

Check that block holder ( 3), retaining ring (4), drive blocks (5), drive

shaft (6), and coupling cover ( 7) are not bent, broken cracked or warped.

TO FRAME 3

MODELS 5504AA AND 5504AB

MODEL 5300GP

TA 103675

Table 2-8. End Bell Housing (Models 5504AA and 5504AB) Wear Limits

Size and Fit

Wear Limits

of New Parts

Index

(inches)

Number

Item /Point of Measurement

None

2.0465 to 2.0468

Inside diameter of drive end bell

bearing bore

Table 2-9. End Bell Housing (Model 5300GP) Wear Limits

Size and

Fit