HOUSING AND STATOR ASSEMBLY

TM 9-2920-225-34

2-16. HOUSING AND STATOR ASSEMBLY

TOOLS: No special tools required

SUPPLIES: Housing seal (2)

Sealer compound, type II, MIL-S-45180

Tags

PERSONNEL: One

EQUIPMENT CONDITION : Generator removed from vehicle, pulley removed from

a. Preliminary Procedures.

(1) Clean outside of generator before disassembly. Refer to para 1-3.

(2) Remove end cover and regulator assembly. Refer to para 2-14.

(3) Remove drive end bell and rotor assembly. Refer to para 2-15.

b. Disassembly.

Tag all leads joined to stator terminal (1) so that they can be put back in the

same place.

2. Take off three nuts (2) and take off capacitor panel ( 3). Take off three

nuts (4), all leads, and flat washers ( 5).

3. Take off two nuts (6), lockwashers ( 7), and flat washers (8) that join

stator terminal (1) to housing (9). Carefully lift stator from housing.

GO TO FRAME 2

TA 103633

2-133