Section V. LEECE-NEVILLE MODEL GENERATOR 3002AE

TM 9-2920-225-34

2-14. END COVER AND REGULATOR ASSEMBLY.

TOOLS: No special tools required

SUPPLIES: Housing preformed packing

Artillery and automotive grease, type GAA, MIL-G-10924

Tags

PERSONNEL: One

EQUIPMENT CONDITION: Generator removed from vehicle, pulley removed from

generator.

a. Preliminary Procedure. Clean outside of generator before disassembly. Refer

b. Removal.

Take out six screws (1).

CAUTION

Be careful when lifting end cover (2) and regulator (3)

assembly. Regulator leads (4) may be damaged and

generator will not work correctly.

2. Lift end cover (2) and regulator (3) assembly clear of housing (5).

3. Tag five regulator leads (4) so that they can be put back in the same place.

4. Slip off five regulator leads (4) from terminal strip (6).

5. Take preformed packing (7) from groove in housing (5). Throw away packing.

END OF TASK

2-118