Inspection and Repair. - TM-9-2815-210-34-2-20305

TM 9-2815-210-34-2-2

I n s p e c t i o n and Repair.

FRAME 1

Check that breather valve housing (1), breather valve spring housing (2),

breather valve end cover (3), and breather tube adapter (4) have no cracks.

I f any of these parts is cracked, throw away crankcase breather valve

a s s e m b l y and get a new one.

WARNING

Dry cleaning solvent is flammable. Do not use near an

o p e n flame. K e e p a fire extinguisher nearby when sol-

v e n t i s u s e d . U s e only in well-ventilated places.

Failure to do this may result in injury to personnel and

d a m a g e to equipment.

Check that breather valve housing (1), breather valve spring housing (2),

breather valve end cover (3), and breather tube adapter (4) have no nicks,

b u r r s or raised metal. F i x minor nicks, burrs, and raised metal with a fine

m i l l file or a crocus cloth dipped in dry cleaning solvent.

C h e c k that four nuts (5) and all screws (6) have no thread damage. Throw

a w a y damaged nuts and screws and get new ones.

C h e c k all threaded holes in breather valve housing (1). Fix minor thread

damage with a tap.

GO TO FRAME 2