FRAME 8 - TM-9-2815-210-34-2-20238

9-2815-210-34-2-2

FRAME 8

NOTE

I n t a k e valve seats (1) are bigger than exhaust valve

seats.

C h e c k that three intake valve seats (1) are not cracked or loose. If any

i n t a k e valve seat is cracked or loose, take it out using engine valve seat

knockout tool.

C h e c k that three intake valve seats (1) are not burned or pitted. If any

i n t a k e valve seat is burned or pitted, take it out using engine valve seat

knockout tool.

S e t cylinder head (2) on side as shown. Coat face if a new intake valve (3)

w i t h Prussian blue. Put new intake valve in cylinder head so that it rests

a g a i n s t any intake valve seat (1).

T u r n new intake valve (3) 1/2-turn in either direction.

P u s h new intake valve (3) straight out of cylinder head (2). Check for an

e v e n coating of Prussian blue all the way around intake valve seat (1) just

c h e c k e d . If there is not an even coating, tag intake valve seat just checked

f o r grinding by machine shop.

D o steps 3 through 5 again for other two intake valve seats (1).

GO TO FRAME 9

4-218