M1089 SOLENOID TEST ADAPTER - TM-9-2320-366-20-31180

TM 9-2320-366-20-3

E-8. M1089 SOLENOID TEST ADAPTER

Assemble the M1089 solenoid test adapter according to the following steps. Refer to the following parts list and Figure

E-12. M1089 Solenoid Test Adapter for details.

Part Number

Material Description

National Stock

Qty

Number

2-2-2 080401CA

Tee, Tube

2-2 080202CA

Elbow, Pipe to Tube

4-2 130140B

Bushing, Pipe

NB-2-031

Tubing, Nonmetallic

24 in.

Figure E-12. M1089 Solenoid Test Adapter

All dimensions are in inches (millimeters).

Cut one piece of nonmetallic tubing (1) to 6.0 in. (152.4 mm) long.

Cut one piece of nonmetallic tubing (2) to 18.0 in. (457.2 mm) long.

Remove three nuts (3) and ferrule sleeves (4) from tube tee (5).

Install two nuts (3) and ferrule sleeves (4) on nonmetallic tubing (1).

Install nonmetallic tubing (1) on tube tee (5).

Remove nut (6) and ferrule sleeve (7) from pipe to tube elbow (8).

Install two nuts (3 and 6) and ferrule sleeves (4 and 7) on nonmetallic tubing (2).

Install nonmetallic tubing (2) on tube tee (5).

Install nut (6) on pipe to tube elbow (8).

Install pipe bushing (9) on pipe to tube elbow (8).