M1089 30K WINCH TEST ADAPTER - TM-9-2320-366-20-31179

TM 9-2320-366-20-3

E-7. M1089 30K WINCH TEST ADAPTER

Assemble the M1089 30K winch test adapter according to the following steps. Refer to the following parts list and

Figure E-11. M1089 30K Winch Test Adapter for details.

Part Number

Material Description

National Stock

Qty

Number

4-4-4 100401BA

Tee, Tube

4-6 100102BA

Adapter, Straight, Pipe to Tube

207P-4

Coupling, Pipe

NB-4-035

Tubing, Nonmetallic

4 in.

MIL-T-27730

Tape, Antiseizing

1 roll

Figure E-11. M1089 30K Winch Test Adapter

All dimensions are in inches (millimeters).

Cut two pieces of nonmetallic tubing (1 and 2) to 2.0 in. (50.8 mm) long.

Remove three nuts (3), sleeves (4), and ferrules (5) from tube tee (6).

Install two nuts (3), sleeves (4), and ferrules (5) on nonmetallic tubing (1).

Install nonmetallic tubing (1) on tube tee (6).

Remove nut (7), sleeve (8), and ferrule (9) from straight adapter (10).

Install two nuts (3 and 7), sleeves (4 and 8), and ferrules (5 and 9) on nonmetallic tubing (2).

Install nonmetallic tubing (2) on tube tee (6).

Install nut (9) on straight adapter (10).

Apply one wrap of antiseizing tape to threads of straight adapter (10).

Install pipe coupling (11) on straight adapter (10).

Change 1

E-15