100 AMP ALTERNATOR TO REVERSE POLARITY RELAY 12 VDC CABLE REPLACEMENT

TM 9-2320-366-20-3

7-72. 100 AMP ALTERNATOR TO REVERSE POLARITY RELAY 12 VDC CABLE

REPLACEMENT

This task covers:

a. Removal

c. Follow-On Maintenance

b. Installation

INITIAL SETUP

Equipment Conditions

Materials/Parts

Spare tire lowered (TM 9-2320-366-10-2).

Dispenser, Pressure Sensitive Adhesive Tape

Cab raised (TM 9-2320-366-10-1).

Batteries disconnected (para 7-57).

Ties, Cable, Plastic (Item 69, Appendix D)

Lockwasher (Item 96, Appendix G)

Nut, Self-Locking (Item 144.1, Appendix G)

Tools and Special Tools

Tool Kit, Genl Mech (Item 46, Appendix C)

Wrench, Torque, 0-175 lb-ft (Item 58, Appendix C)

Wrench, Torque, 0-200 lb-in. (Item 59, Appendix C)

Socket Set, Socket Wrench (Item 34, Appendix C)

a. Removal.

(1) Loosen clamp (1) on turbocharger intake hose (2).

(2) Remove turbocharger intake hose (2) from intake air

cleaner boot (3).

(3) Lift terminal cover (4) on terminal lugs TL47 (5) and

TL61 (6).

NOTE

Remove plastic cable ties as required.

(4) Remove nut (7), lockwasher (8), and terminal lugs TL47

(5) and TL61 (6) from reverse polarity relay 12 VDC

LOAD terminal (9). Discard lockwasher.

Change 1