BATTERY/BATTERY CABLES REPLACEMENT

TM 9-2320-366-20-3

7-55. BATTERY/BATTERY CABLES REPLACEMENT

This task covers:

a. Removal

c. Follow-On Maintenance

b. Installation

INITIAL SETUP

Equipment Conditions

Materials/Parts

Engine shut down (TM 9-2320-366-10-1).

Dispenser, Pressure Sensitive Adhesive Tape

Battery box cover removed (TM 9-2320-366-10-2).

Grease, Automotive and Artillery (GAA)

Tools and Special Tools

Tool Kit, Genl Mech (Item 46, Appendix C)

Lockwasher (Item 100, Appendix G)

Apron, Rubber (Item 3, Appendix C)

Goggles, Industrial (Item 15, Appendix C)

References

Gloves, Rubber (Item 13, Appendix C)

TM 9-6140-200-14

Puller, Battery Terminal (Item 28, Appendix C)

a. Removal.

WARNING

Remove rings, bracelets, watches, necklaces, and any other jewelry before working around vehicle.

Jewelry can catch on equipment and cause injury or short across electrical circuit and cause

severe burns or electrical shock. Batteries can explode from a spark. Battery acid is harmful to

skin and eyes. Always wear eye protection and rubber gloves when working with batteries.

Failure to comply may result in injury to personnel.

Battery acid (electrolyte) is extremely harmful. Always wear safety goggles and rubber gloves, and

do not smoke when performing maintenance on batteries. Injury will result if acid contacts skin

or eyes. Wear rubber apron to prevent clothing being damaged. Failure to comply may result in

injury to personnel.

Negative battery terminals and battery tester negative terminal lug must be disconnected first.

Failure to comply may result in serious injury or death to personnel.