Toggle Switch Installation.

TM 9-2320-366-20-3

d. Toggle Switch Installation.

(1) Connect four wires (1) to toggle switch (2).

NOTE

Keyway of toggle switch aligns with keyway

slot in mounting hole.

(2) Position toggle switch (2) in mounting hole (3).

(3) Install switch guard cover (4) on toggle switch (2) with

nylon washer (5) and nut (6).

WARNING

Adhesives, solvents, and sealing com-

pounds can burn easily, can give off

harmful vapors, and are harmful to skin

and clothing. Keep away from open fire

and use in a well-ventilated area. If

adhesive, solvent, or sealing compound

gets on skin or clothing, wash

immediately with soap and water. Failure

to comply may result in injury to

personnel.

(4) Apply adhesive to seating surface (7).

(5) Connect connector (8) to boom up/down controller (9).

(6) Position boom up/down controller (9) in REMOTE

CONTROL UNIT (10).

Change 1

7-193