Toggle Switch Removal.

TM 9-2320-366-20-3

7-32. REMOTE CONTROL UNIT REPAIR (CONT)

c. Toggle Switch Removal.

NOTE

One controller needs to be removed for

access to toggle switch. Boom Up/Down

controller shown.

(1) Remove four self-locking nuts (1) from boom up/down

controller (2). Discard self-locking nuts.

(2) Remove boom up/down controller (2) from REMOTE

CONTROL UNIT (3) until connector (4) is accessible.

(3) Disconnect connector (4) from boom up/down controller

(2).

(4) Remove adhesive from seating surface (5).

(5) Remove nut (6), nylon washer (7), and switch guard

cover (8) from toggle switch (9).

(6) Remove toggle switch (9) from REMOTE CONTROL

UNIT (3) until four wires (10) are accessible.

NOTE

Tag wires and connection points prior to

disconnecting.

(7) Disconnect four wires (10) from toggle switch (9).

7-192

Change 1