|
|
TM 9-2320-366-20-3
This task covers:
a. Removal
c. Follow-On Maintenance
b. Installation
INITIAL SETUP
Equipment Conditions
Materials/Parts
Spare tire lowered (TM 9-2320-366-10-2).
Dispenser, Pressure Sensitive Adhesive Tape
Batteries disconnected (para 7-57).
(Item 20, Appendix D)
Lockwasher (4) (Item 95, Appendix G)
Washer, Spring (6) (Item 290, Appendix G)
Tools and Special Tools
Tool Kit, Genl Mech (Item 46, Appendix C)
Nut, Self-Locking (6) (Item 165, Appendix G)
Wrench, Torque, 0-200 lb-in. (Item 59, Appendix C)
Socket Set, Socket Wrench (Item 34, Appendix C)
a. Removal.
NOTE
Tag wires and connection points prior to
disconnecting.
(1) Loosen clamp (1) on intake air cleaner boot (2).
(2) Remove intake air cleaner boot (2) from intake air
cleaner housing (3).
(3) Lift terminal cover (4) on terminal lugs TL61 (5) and
TL47 (6).
(4) Remove nut (7), lockwasher (8) and terminal lugs TL61
(5) and TL47 (6) from 100 amp reverse polarity relay (9).
Discard lockwasher.
(5) Lift dust boot (10) on terminal lug TL44 (11).
(6) Remove nut (12), lockwasher (13), and terminal lug TL44
(11) from 100 amp reverse polarity relay (9). Discard
lockwasher.
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |