Follow-On Maintenance. - TM-9-2320-366-20-30731

TM 9-2320-366-20-3

NOTE

Perform steps (9) through (13) on vehicles

serial numbers 8426 and lower that have not

had fan clutch replaced.

(9) Install grommet (12) on engine fan (13).

(10) Install fan support plate (14) on engine fan (13).

(11) Position engine fan (13) and fan support plate (14) on

fan clutch assembly (15) with six washers (16),

lockwashers (17), and screws (18).

(12) Tighten six screws (18) to 15 lb-ft (20 Nm) in sequence

shown.

(13) Re-tighten six screws (18) to 22-32 lb-ft (30-44 Nm) in

sequence shown.

WARNING

Adhesives, solvents, and sealing com-

pounds can burn easily, can give off

harmful vapors, and are harmful to skin

and clothing. Keep away from open fire

and use in a well-ventilated area. If

adhesive, solvent, or sealing compound

gets on skin or clothing, wash

immediately with soap and water. Failure

to comply may result in injury to

personnel.

(14) Apply antiseize compound to threads of fitting (19).

(15) Install fitting (19) on fan clutch assembly (15).

(16) Connect air hose (20) to fitting (19).

c. Follow-On Maintenance.

Install top radiator fan shroud (para 6-4).

End of Task.

Change 1

6-73