 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-366-20-3
4-16. THROTTLE POSITION SENSOR (TPS) CABLE ASSEMBLY REPLACEMENT
(CONT)
b. Installation.
(1) Position TPS cable assembly (1) in clamp (2).
(2) Close latch (3) on clamp (2).
(3) Position TPS cable assembly (1) on stud (4).
(4) Install washer (5) and cotter pin (6) on stud (4).
(5) Install TPS cable assembly (1) on bracket (7) with three
screws (8), washers (9) and nuts (10).
(6) Connect electrical connector (11) to TPS cable assembly
(1).
(7) Lower cab (TM 9-2320-366-10-1).
(8) Connect batteries (para 7-57).
NOTE
Wait until Neutral (N) indication appears in
pushbutton shift selector display before
positioning master power switch off.
(9) Position master power switch on and off five times (TM
9-2320-366-10-1).
NOTE
TPS will self-adjust but vehicle will need to be
operated through all gear ranges several
times before correct shifting will be noticed.
(10) Operate vehicle and check for smooth transmission
shifting through all gear ranges (TM 9-2320-366-10-1).
End of Task.
4-86
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals