FUEL TANK AND BRACKETS REPLACEMENT

TM 9-2320-366-20-3

4-8. FUEL TANK AND BRACKETS REPLACEMENT

This task covers:

a. Removal

c. Follow-On Maintenance

b. Installation

INITIAL SETUP

Equipment Conditions

Materials/Parts

Batteries disconnected (para 7-57).

Rag, Wiping (Item 50, Appendix D)

Dispenser, Pressure Sensitive Adhesive Tape

Tools and Special Tools

Tool Kit, Genl Mech (Item 46, Appendix C)

Ties, Cable, Plastic (Item 69, Appendix D)

Container (60 Gal (227 L) capacity)

Sealing Compound (Item 56, Appendix D)

Wrench, Torque, 0-175 lb-ft (Item 58, Appendix C)

Primer, Sealing Compound (Item 49, Appendix

Wrench, Torque, 0-600 lb-ft (Item 60, Appendix C)

Socket Set, Impact (Item 33, Appendix C)

Packing, Preformed (Item 216, Appendix G)

Wrench, Torque. 0-200 lb-in. (Item 59, Appendix C)

Nut, Self-Locking (2) (Item 156, Appendix G)

Nut, Self-Locking (8) (Item 161, Appendix G)

Personnel Required

(2)

WARNING

Diesel fuel is flammable. If fuel is spilled,

clean it up immediately. Failure to comply

may result in serious injury or death to

personnel.

a. Removal.

NOTE

Remove plastic cable ties as required.

(1) Disconnect connector clamp (1) from fuel level sending

unit connector (2).

(2) Disconnect fuel level sending unit connector (2) from

connector P82 (3).

(3) Position container under fuel tank (4).

(4) Remove drain plug (5) from fuel tank (4) and drain fuel.

4-42

Change 1