NO POWER TO ENHANCED POSITION LOCATION REPORTING SYSTEM (EPLRS)

TM 9-2320-366-20-3

x3. NO POWER TO ENHANCED POSITION LOCATION REPORTING SYSTEM (EPLRS)

INITIAL SETUP

Equipment Conditions

Tools/Special Tools

Engine shut down (TM 9-2320-366-10-2)

Multimeter, Digital (Item 22, Appendix C)

Tool Kit, Genl Mech (Item 46, Appendix C)

Materials/Parts

Ties, Cable, Plastic (Item 69, Appendix D)

Personnel Required

(2)

START

WARNING

Read WARNING

TEST OPTIONS

on following page.

Voltage Test or

Circuit breaker CB5 is not

STE/ICE-R Test #89

tripped.

Is 24 VDC present at

REASON FOR QUESTION

terminal lug TL8?

POSSIBLE PROBLEMS

If 24 VDC is not present, go to

step 2 of this fault. If 24 VDC

Faulty circuit breaker CB5.

is present, perform Enhanced

Faulty digitization rack power

Position Location Reporting

supply.

System (EPLRS)

Faulty Enhanced

troubleshooting.

Position Location Reporting

System (EPLRS).

YES

Go to step 2 of this fault.

Contact supervisor, Ehanced Position

Location Reporting System (EPLRS)

troubleshooting needs to be performed.

Change 2