VOLTAGE TEST - TM-9-2320-366-20-30361

TM 9-2320-366-20-3

WARNING

Remove rings, bracelets, watches, necklaces,

and any other jewelry before working around

vehicle. Jewelry can catch on equipment and

cause injury or short across electrical circuits

and cause severe burns or electrical shock.

VOLTAGE TEST

(1) Remove dust boot from terminal lug TL15.

(2) Set multimeter to volts DC.

(3) Connect positive (+) probe of multimeter to

terminal lug TL15.

(4) Connect negative (-) probe of multimeter to

known good ground.

(5) Position master power switch to on

(TM 9-2320-366-10-1) and note reading on

multimeter.

(6) Position master power switch to off

(TM 9-2320-366-10-1).

(7) If 24 VDC is not present, replace power

cable from terminal lug TL15 to terminal

lug TL22.

(8) If 24 VDC is present, replace Power

Distribution Panel (PD2).

Change 2

2-2287