VOLTAGE TEST - TM-9-2320-366-20-30351

TM 9-2320-366-20-3

WARNING

Remove rings, bracelets, watches, necklaces,

and any other jewelry before working around

vehicle. Jewelry can catch on equipment and

cause injury or short across electrical circuits

and cause severe burns or electrical shock.

VOLTAGE TEST

(1) Remove dust boot from terminal lug TL24.

(2) Set multimeter to volts DC.

(3) Connect positive (+) probe of multimeter to

terminal lug TL24.

(4) Connect negative (-) probe of multimeter to

a known good ground and note reading on

multimeter.

(5) If 24 VDC is not present, replace power cable

from terminal lug TL24 to terminal lug TL20

(para 20-81).

(6) Install dust boot on terminal lug TL24.

Change 2

2-2277