NO POWER TO DIGITIZATION RACK (CONT) - TM-9-2320-366-20-30349

TM 9-2320-366-20-3

(1) Remove three screws and washers from

Power Distribution Panel (PDP).

(2) Remove three screws from Power Distribution

Panel (PDP).

(3) Lift Power Distribution Panel (PDP) to gain

access.

(4) Push in reset button on circuit breaker CB11

to see if it is tripped.

(5) If circuit breaker CB11 is not tripped, go to

step 3 of this fault.

(6) If circuit breaker CB11 trips agian, replace

circuit breaker CB11 (para 20-81).

NOTE

Perform steps (7) through (9) if circuit

breaker CB11 is faulty.

(7) Position electrical distribution block cover on

power distribution shelf.

(8) Tighten wing screw on electrical distribution

block cover.

(9) Install wing screw in power distribution shelf.

Change 2

2-2275