|
|
TM 9-2320-366-20-1
INITAL SETUP
Equipment Conditions
Personnel Required
Engine shut down (TM 9-2320-366-10-1).
(2)
Tools and Special Tools
References
Tool Kit, Genl Mech (Item 46, Appendix C)
TM 9-4910-571-12&P
STE/ICE-R (Item 41, Appendix C)
Multimeter, Digital (Item 22, Appendix C)
START
WARNING
CAUTION
Read WARNING and
CAUTION on
KNOWN INFO
TEST OPTIONS
following page.
1.
Turn signals illuminate.
Voltage Test or
Rear hazard lights illuminate.
STE/ICE-R Test #89
Is volts DC pulse present at
POSSIBLE PROBLEMS
REASON FOR QUESTION
connector J19 socket 5?
Faulty dashboard cable
If volts DC pulse is not
assembly.
present, wire 1566 is faulty.
Faulty turn signal switch.
If volts DC pulse is present,
turn signal switch is faulty.
NO
Repair wire 1566 from connector PX14 socket 2 to
connector J19 socket 5 (para 2-45) or replace
YES
WTEC II dashboard cable assembly (para 7-10) or
WTEC III dashboard cable assembly (para 7-11).
Replace turn signal switch (para 7-26).
Change 1
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |