 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-279-20-1
Engine Maintenance Instructions (Cont)
7-73.1. BEACON LIGHT ASSEMBLY REMOVAL/REPAIR/INSTALLATION (MODELS
A, B, AND C) (M984E1) (CONT).
(1.1) Remove three screws (4.1), collar (4.2),
two screws (4.3), and lens (4.4) from
beacon light assembly (4).
(1.2) Remove flashtube lamp (4.5) from
Model B beacon light assembly (4).
(1.3) Remove three screws (4.6) from beacon
light assembly (4).
NOTE
Model B and Model C have removable
power supply units. Model C has a seal
that is removed with power supply.
Model C has a plug connection between
power supply and flash tube holder
assembly.
Perform step (1.4) for Model B and
steps (1.5) and (1.6) for Model C.
Wires remain connected until step (3).
(1.4) Remove power supply unit (4.7) from
beacon light assembly (4).
(1.5) Remove flash tube holder
assembly (4.8), from plug
connection (4.9) and power supply
unit (4.10).
(1.6) Remove power supply unit (4.10) and
seal (4.11) from beacon light
assembly (4).
(2)
Remove three locknuts (5), washers (6),
screws (7), clamp (8), and beacon light
assembly (4) from mount (9).
(3)
Disconnect connectors (10) and remove
gasket (11), wire (12), and grommet (13)
from mount (9).
(4)
Remove clamp (8) from wire (12).
(5)
Remove two nuts (14), lockwashers (15),
washers (16), screws (17), and
mount (9).
Change 4
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals