Installation. - TM-9-2320-279-20-10955

TM 9-2320-279-20-1

Electrical System Maintenance Instructions (Cont)

b. Installation.

NOTE

Left and right beacon light

assemblies are installed the same

way.

Install right side mount so that

cutout on bottom faces forward. Left

side mount does not have cutout.

Install mount (1) with two screws (2),

(1)

washers (3), lockwashers (4), and

nuts (5).

Install clamp (6) on wire (7).

(2)

Install grommet (8) and wire (7) in

(3)

mount (1).

Install gasket (9).

(4)

Connect two connectors (10).

(5)

Install beacon light assembly (11) and

(6)

clamp (6) on mount (1) with three

screws (12), washers (13), and

locknut (14).

NOTE

There are three models of beacon lights.

Model A uses a clamp to secure the light.

Model B and Model C use a collar and

screws. Perform step (7) for Model A.

(7)

Install lens (15) on beacon light

assembly (11) with clamp (16) and

screw (17).

7-270.1

Change 3