REAR CLEARANCE MARKER LIGHTS AND BRACKET REMOVAL/INSTALLATION (M984E1).

9-2320-279-20-1

Electrical System Maintenance Instructions (Cont)

7-67.2. REAR CLEARANCE MARKER LIGHTS AND BRACKET REMOVAL/INSTALLATION

(M984E1).

This task covers:

c. Follow-on Maintenance

a. Removal

b. Installation

INITIAL SETUP

References

Models

None

M984E1

Equipment Condition

Test Equipment

None

Condition Description

TM or Para

Batteries disconnected.

Special Tools

TM 9-2320-279-10 Shut off engine.

None

Special Environmental Conditions

Supplies

None

Tags, identification, Item 48, Appendix C

Ties, cable, plastic, Item 52, Appendix C

General Safety Instructions

None

Personnel Required

MOS 63S, Heavy wheel vehicle mechanic

a. Removal.

NOTE

All three clearance lights

are removed the same way.

Tag and mark wires when

disconnecting.

(1) Disconnect wire (1) from

connector (2).

(2) Remove two screws (3) and lens (4) from lampholder (5).

(3) Remove lamp (6).

NOTE

Cut plastic cable ties as necessary.

(4) Remove two screws (7), lampholder (5), and gasket (6) from

bracket (9).