Removal. - TM-9-2320-279-20-10834

TM 9-2320-279-20-1

Electrical System Maintenance Instructions (Cont)

7-51. FLASHER RELAY REMOVAL/INSTALLATION (CONT).

Removal.

NOTE

There are three kinds of flasher relays.

Model A is round and is strapped to a wire harness with a plastic cable tie.

Model B is square and is attached under the dash with a screw, lockwasher, and

nut.

Model C is attached to the headlight guard with two screws and locknuts.

For Model A, do steps (1) through (4).

For Model B, do steps (5) through (9).

For Model C, do steps (10) and (11).

(1)

Remove six screws (1).

(2)

Move instrument panel (2) toward steering wheel (3).

(3)

Remove flasher relay (4) from base (5).

(4)

Cut plastic cable tie (6) and remove flasher relay (4).

(5)

Remove three screws (7).

(6)

Remove nut (8), lockwasher (9), ground wire (10), flasher relay (11), and screw (12).

(7)

Remove headlight guard (13).

(8)

Disconnect electrical connector (14) from flasher relay (11).

(9)

Remove flasher relay (11).

(10)

Remove electrical connector (14) from flasher relay (15).

(11)

Remove two locknuts (16), flasher relay (15), and two screws (17) from headlight guard (13).

Change 5