RECOVERY WlNCH (M984 and M984E1)

9-2320-279-20-1

Vehicle

Operation

Systems

(Cont)

1 - 2 3 . R E C O V E R Y W l N C H ( M 9 8 4 a n d M 9 8 4 E 1 ) . (fig. 1-19) The recovery winch assembly (M984)

is mounted on the chassis frame, centered over the fourth axle. It is powered by a hydraulic motor which

drives the winch drum through a planetary gearbox. A shift control on the winch permits 2-speed

operation.

The recovery winch (M984E1) is mounted on the chassis frame, between the equipment body and crane.

It is powered by an automatic 2-speed hydraulic motor which drives the winch drum through a planetary

(fig. 1-19) The retrieval system is mounted on the rear frame

1-24. RETRIEVAL SYSTEM (M984E1

and is powered from the vehicle hydraulic system. The retrieval system is operator-controlled from the

retriever control assembly located above the left rear fender.

Figure 1-19. Recovery Winch (M984 and M984E1).