|
|
TM 9-2320-211-34-2-1
Tests and Adjustments.
g.
FRAME 1
CAUTION
Do not use more than 15 psi of air pressure.
Put air pressure gage (1) in air pressure valve hole.
1.
Using adapter (2) and air line (3), hook up air supply to front axle (4).
2.
Using air pressure gage (1) and stop watch, check that no more than 5 psi of air
3.
leaks in 45 seconds.
If more than 5 psi of air leaks out, tighten all screws and nuts again.
4.
Do steps 3 and 4 again until less than 5 psi of air leaks in 45 seconds.
5.
Take out air pressure gage (1) and put in air pressure valve (5).
6.
Take off air line (3) with adapter (2) and put in fill plug (6) with gasket (7).
7.
END OF TASK
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |