|
|
TM 9-2320-211-34-2-1
b.
Test.
FRAME 1
1.
Start engine. Refer to TM 9-2320-211-10.
2.
Put handbrake (1) in down (brake off) position.
3.
Set truck in motion. Refer to TM 9-2320-211-10.
Move gearshift lever (2) through all positions at different speeds. Listen
4.
for any unusual noises.
NOTE
U n u s u a l noises might mean transmission gears
a r e not fully in mesh or that there is more than.
normal clearance between gear teeth.
5.
Make sure gearshift lever (2) does not go back to neutral position by itself.
6.
Stop truck and turn off engine. Refer to TM 9-2320-211-10.
7.
Put handbrake (1) in up (brake on) position.
NOTE
Follow-on Maintenance Action Required:
1.
Check outside of transmission case for leaks
a t gasket joints.
If any unusual noises were heard, if gearshift
2.
lever went back to neutral position by itself or
if fluid leaks are noted, repair transmission.
Refer to para 7-3.
END OF TASK
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |