Inspection and Repair. - TM-9-2320-211-34-2-10159

TM 9-2320-211-34-2-1

WARNING

Dry cleaning s o l v e n t is flammable. Do not use

n e a r an open flame. K e e p a fire extinguisher

n e a r b y w h e n s o l v e n t i s u s e d . U s e only in well-

v e n t i l a t e d p l a c e s . Failure to do this may result

i n injury to personnel and damage to equipment.

Clean all parts with solvent. Dry using lint-free cloth.

Cleaning.

I n s p e c t i o n and Repair.

FRAME 1

C h e c k that housing (1) and cover (2) have no cracks. If cracks are found,

g e t a new part.

P l u g one opening (3) in cooler core (4). Put a 150 psi air source into the

other opening.

Put cooler core (4) under water. Check that cooler does not leak. If cooler

l e a k s , get a new one.

Check that gasket surface on cooler core (4) is smooth. Take off rough spots

u s i n g crocus cloth.

C h e c k that plungers (5) have no scratches or burrs. Polish plungers with

crocus cloth.

GO TO FRAME 2