Replacement. - TM-9-2320-211-20-3-20319

TM 9-2320-211-20-3-2

Replacement.

FRAME 1

Using hoist, lift front winch and roller assembly (1) to clear front bumper (2)

and lower it into place as shown, alining screw holes.

2. Using 3/4-inch wrench, screw in and tighten three screws, flat washers, and

lockwashers (3) on both sides of front winch and roller assembly (1).

3. Using 3/4-inch wrenches, screw in and tighten three screws with flat washers

(4) and three locknuts (5) on both sides of front winch and roller assembly (1).

4. Put propeller shaft front universal joint on yoke on winch drive shaft. Refer

to Part 1, para 10-11.

5. Take off chain sling and hoist. Move hoist away.

END OF TASK