 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-211-20-3-2
Assembly of Rack Assembly.
h.
FRAME 1
Find front of board (1). Put ten square neck screws (2) through holes in
1.
board so screw heads are on front side.
2.
Put square neck screws (2) through end bow pocket assemblies (3) and bow
pocket assemblies (4). Using 1/2-inch wrench, screw on and tighten nuts (5)
on square neck screws. If screws do not come through enough to screw on
nuts, then using mallet, hammer screws in.
Find front of board (6). Put ten square neck screws (7) through holes in
3.
board so screw heads are on front side.
Put square neck screws (7) through end bow pocket assemblies (3) and bow
4.
pocket assemblies (4). Using 1/2-inch wrench, screw on and tighten nuts (8)
on square neck screws. If screws do not come through enough to screw on
nuts, then using mallet, hammer screws in.
GO
TO FRAME 2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals