Replacement. - TM-9-2320-211-20-3-20259

TM 9-2320-211-20-3-2

Replacement.

Put windshield assembly (1) in place as shown.

Using 3/8-inch wrench, screw in and tighten seven screws (2).

Aline hole in each of two adjusting arms (3) with hole in each of two

tabs (4) on side of windshield assembly (1).

4. Using 7/16-inch wrench, screw in and tighten two screws (5).

5. Loosen two windshield adjusting arm thumbscrews (6) and using windshield

lock handle (7), pull windshield closed. Push windshield lock handle down.

NOTE

Follow-on Maintenance Action Required:

Replace windshield wiper motor. Refer to para 19-8.

END OF TASK