UNIVERSAL JOINT ASSEMBLY REPAIR.

TM 9-2320-211-20-3-1

10-14. UNIVERSAL JOINT ASSEMBLY REPAIR.

3-inch punch hammer

TOOLS: 5/8-inch socket wrench

Eye shields

Vise

9/32-inch open end wrench

Small stiff brush

SUPPLIES: Solvent, dry cleaning, type II (SD-2), Fed. Spec P-D-680

Cork washer (4)

PERSONNEL: One

EQUIPMENT CONDITION: Truck parked, engine off, handbrake set.

a. Preliminary Procedure. Remove propeller shaft.

(a) For forward rear axle-to-rear axle propeller shaft, refer to

(b) For power divider-to-bevel gearcase propeller shaft, refer to

10-12.

(d) For power takeoff-to-front winch propeller shaft, refer to para

10-11.

(e) For power takeoff-to-hydraulic hoist pump propeller shaft (truck

M51A2), refer to para 10-15.

(f) For transmission transfer case-to-forward rear axle (with center

bearing) (truck M55A2), refer to para 10-8.

(g) For transmission transfer case-to-forward rear axle (without center

bearing) (trucks M51A2, M52A2, M54A2, M54A2C, and M543A2), refer to para 10-7.

(h) For transmission transfer case-to-front axle propeller shaft, refer

(i) For transmission-to-transmission transfer case propeller shaft, refer

10-81