Repair. - TM-9-2320-211-20-3-10602

TM 9-2320-211-20-3-1

Repair.

NOTE

If directional signal assembly is new or is working,

do frame 1. If assembly is not working, go to

frame 2.

Using screwdriver, unscrew and throw away two screws (1). Using drill,

no. 36 drill bit, and using screw holes (2) as guides, drill holes through

upper body (3).

CAUTION

When using no. 28 drill bit, do not drill into upper

body. Assembly may become damaged.

Using drill and no. 28 drill bit, drill screw holes (2).

NOTE

If tap is not available, use self-tapping screws.

Using tap, tap holes in upper body (3).

Using screwdriver, screw in and tighten two screws.

Do steps 1 through 4 again for other screws (4).

TO FRAME 2