Adapter. - TM-9-2320-211-20-3-10140

TM 9-2320-211-20-3-1

CAUTION

Fittings are made of soft brass.

They can be

stripped very easily if tightened

too much.

Only tighten enough to stop fuel

from leaking.

NOTE

The adapter at the fuel transfer

pump is used

for this procedure.

Using 3/4-inch open end wrench, screw in and tighten adapter (1).

2. Using 3/4-inch open end wrench, hold adapter (1). Using 5/8-inch combina-

tion box and open end wrench, screw on and tighten tube nut (2),

NOTE

Follow-on Maintenance Action Required:

Start engine. Refer to TM 9-2320-211-10.

2. Check that fuel lines and fittings have no leaks.

3. Stop engine. Refer to TM 8-2320-211-10.

END OF TASK

TA 087096

4-56