Air vent line fitting. - TM-9-2320-211-20-3-10139

TM 9-2320-211-20-3-1

(b) Air vent line fitting.

CAUTION

Fittings are made of soft brass. They can be

stripped very easily if tightened too much.

Only tighten fittings enough to stop fuel from

leaking.

NOTE

The air vent line fitting on the fuel tank is used

for this procedure.

FRAME 1

Using 3/4-inch open end wrench, screw on and tighten line fitting (1).

Using 5/8-inch wrench, screw on and tighten vent line (2).

NOTE

Follow-on Maintenance Action Required:

1. Start engine. Refer to TM 9-2320-211-10.

2. Check that fuel lines and fittings have no leaks.

3. Stop engine. Refer to TM 9-2320-211-10.

END OF TASK

TA 087102

4-55