Tee fitting. - TM-9-2320-211-20-3-10141

TM 9-2320-211-20-3-1

(d) Tee fitting.

CAUTION

Fittings are made of soft brass. They can be

stripped very easily if tightened too much.

Only tighten enough to stop fuel from leaking.

NOTE

The tee fitting at the final fuel filter assembly

(late model trucks) is used for this procedure.

FRAME 1

Using 11/16-inch wrench, screw in and tighten tee fitting (1).

Using 9/16-inch wrench, screw in and tighten elbow (2). Using 11/16-inch

wrench, screw in and tighten elbow (3).

3. Using 5/8-inch wrench, screw in and tighten tube nut (4).

4. Put hose (5) in place and using 3/4-inch wrench, screw in and tighten hose

nut (6).

5. Using 3/4-inch wrench, hold hose coupling (7) and screw in and tighten

tube-nut (8).

NOTE

Follow-on Maintenance Action Required:

1. Start engine. Refer to TM 9-2320-211-10.

2. Check that fuel lines and fittings have no leaks.

3. Stop engine. Refer to TM 9-2320-211-10.

4. Close hood and left side panel. Refer to

TM 9-2320-211-10.

END OF TASK

TA 087104

4-57