AIR CLEANER LINES AND FITTINGS REMOVAL AND REPLACEMENT.

TM 9-2320-211-20-3-1

4-6. AIR CLEANER LINES AND FITTINGS REMOVAL AND REPLACEMENT.

TOOLS: 9/16-inch wrench

7/16-inch wrench (2)

Flat-tip screwdriver

Pipe wrench

SUPPLIES: None

PERSONNEL: One

EQUIPMENT CONDITION: Truck parked, engine off, handbrake set.

a. Preliminary Procedures.

(1) Open hood. Refer to TM 9-2320-211-10.

(2) Remove right access panel on fender. Refer to para 7-3.

b. Removal.

NOTE

Depending on model of truck, tube (1) maybe either

copper or plastic tubing.

1. Working behind the instrument panel (2), using 7/16-inch wrench, unscrew

tube nut (3) and take out tube (l).

NOTE

If tube (l) is to be replaced, one end of the tube must

be cut off to let it pass through the firewall.

GO TO FRAME 2